![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Fri Jun 04, 2010 9:53 pm Post subject: |
|
|
Decided to take my own advice and put a scoop detail helmet together.
Having nothing but some screen caps to go off, just did some gum shoe work on ebay and after a couple of weeks of searching,
have come up with the parts needed to do the job.
![](http://propsummit.com/upload/408/1061.jpg)
The only helmet i could find that matches the screen used one was a vintage Wilson helmet. Visualy it matches the hero exactly, same stud postions,
raised stripe along the top and it was the only one i found that had the correct faceguard, every other helmet ive seen that comes close,
the two support bars run straight up and down, the Wilson has them at the correct angle.
![](http://propsummit.com/upload/408/1063.jpg)
I thought the visor would be off a vintage motorcycle helmet and from what i can tell, it was off a vintage Bell helmet.
![](http://propsummit.com/upload/408/1066.jpg)
Notice how the original studs on the hero have been drilled out and moved to the end of the visor, the old holes were left unfilled.
Cant seem to find the original chin strap, any help there would be great, have found a cheap replacement that just needs some minor mods to pull it off.
Will post pics when its all done and have some other ideas for Soylent props that will soon be ready as well. _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Sat Jun 05, 2010 4:04 pm Post subject: |
|
|
Tim, you have and make the best stuff, EVER!
Can I move in?
Love it.
Neil |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
steevy Community Member
Joined: 25 Jul 2007 Posts: 389
|
Posted: Sat Jun 05, 2010 7:40 pm Post subject: |
|
|
Looks like you have all the right parts.The helmet badge is interesting,wonder if it is the same as they used in the wallet?Doesn't look like fabric.On second thought I guess it is probably too big for the wallet badge.Great find though! ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Sat Jun 05, 2010 9:10 pm Post subject: |
|
|
Thanks guys,
Only if you can handle sleeping in the bath Neil.
I think the wallet badge and the helmet badge are the same size.
I followed this scene through and you can see a light scouce track right across the helmet and badge and can still be seen across the badge.
If it was made of material, the light would not reflect back. I will go with an adhesive label for that one.
Gunna see the guy who put the street cop patches together this week and hopefully he can do printed material ones. _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Sun Jun 06, 2010 3:46 pm Post subject: |
|
|
Excellent Tim, once again you'll come up with a great replica. ![Cool](images/smiles/icon_cool.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Mon Jun 07, 2010 4:30 am Post subject: |
|
|
offworld66 wrote: | Thanks guys,
Only if you can handle sleeping in the bath Neil. |
Fine by me
Can't wait to see what this looks like when it's done. Love it.
Neil |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Mon Jun 07, 2010 5:24 pm Post subject: |
|
|
The last Soylent Green prop i want to do is the ID wallet. Found a great one that is the correct shape and even has the New York State seal on it.
Hopefully i can remove town name and replace it with New York City Police Department.
![](http://propsummit.com/upload/408/sgw2.jpg)
Thomas`s work on the ID card is superb but i think it needs a little adjustment to make it spot on. Can somebody take the red seal off the left side of the card, lift the
yellow and black badge a lttle,and place the red seal under it?
![](http://propsummit.com/upload/408/soylentidcopya.jpg) _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
steevy Community Member
Joined: 25 Jul 2007 Posts: 389
|
Posted: Mon Jun 07, 2010 6:54 pm Post subject: |
|
|
After you are done making yours Iwould be in for an ID card and badge if you decide to make some for sale. ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Tue Jun 08, 2010 5:05 am Post subject: |
|
|
Very cool Tim!
Your prop room will be amazing with this, your Mad Max stuff and, of course, your Blade Runner items.
Neil |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Tue Jun 08, 2010 5:09 am Post subject: |
|
|
Hopefully steevy, someone will be able to make the minor adjustments to Thomas`s ID and post it in the spirit of Thomas`s effort and make it available to all.
If that doesnt happen, i will have to get one made and would be glad to send you one.
Im going to get the badge made into a sticker for sure and hopefully will be able to organise a printed version, the problem is finding the right fabric,
is it thin vinyl or a chammy type deal, more searching.
Im not offering any for sale but will get a few extra done for the few who have shown interest in the thread, only need to cover shipping.
This might make it easier to modify the original card. This could go under the yellow and black badge and the red seal could just be removed altogether.
![](http://propsummit.com/upload/408/seal.jpg) _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Tue Jun 08, 2010 5:30 am Post subject: |
|
|
Thanks Neil.
Just waiting for a vintage police belt to arrive from the UK and the Mad Max costume is finished. _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Tue Jun 08, 2010 5:54 am Post subject: |
|
|
offworld66 wrote: | Thanks Neil.
Just waiting for a vintage police belt to arrive from the UK and the Mad Max costume is finished. |
Excited to see the pictures
Can't wait.
Neil |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Tue Jun 08, 2010 6:43 am Post subject: |
|
|
Those are exciting news Tim! Cannot wait another day to see those props you're cooking for us ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
steevy Community Member
Joined: 25 Jul 2007 Posts: 389
|
Posted: Tue Jun 08, 2010 7:21 pm Post subject: |
|
|
Has Soylent Green been released on Bluray?If we could get HD screenshots it would be really helpful. |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
SKIN JOB 66 Community Member
![](http://propsummit.com/upload/351/polnarefff.jpg)
Joined: 16 Jan 2008 Posts: 2724 Location: FRANCE
|
Posted: Sat Jun 12, 2010 4:50 pm Post subject: |
|
|
How did I missed this thread !!!
Excellent work guys... and I can't wait to see Tim's helmet fully completed (same thing for the Mad Max costume) !
Fred _________________ THE FUTURE IS A THING OF THE PAST |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Mr Webber Community Member
![](http://propsummit.com/upload/408/k2_-_copy.jpg)
Joined: 13 Apr 2008 Posts: 1824 Location: Terra Australis
|
Posted: Sun Jun 27, 2010 11:24 pm Post subject: |
|
|
Got it all finished and although it was fairly easy to put together, its become my favorite project. Hope you like it.
Made some soylent green to put in a bag but decided to incorporate them into the base, driven more by lack of space than anything.
Found a great accurate id wallet and removed the Larchmont embossing with nail polish remover and very happy with the final result.
Took some reworking to get the layout of the id to my needs.
The finished display.
What i had to work off.
![](http://propsummit.com/upload/408/soy10.jpg)
Big thanks to steevy for the inspiration and Thomas for the id groundwork.
Neil, joberg, steevy, Andy and Fred, I will have something special for you soon. Stay tuned.
"Tuesday is soylent green day" _________________ Formerly offworld66 |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
REdYOdA Community Member
![](http://i38.photobucket.com/albums/e120/nathanpt2000/110.gif)
Joined: 27 May 2010 Posts: 41 Location: San Francisco
|
Posted: Mon Jun 28, 2010 1:57 am Post subject: |
|
|
Very cool project and well executed! I just wanted to also comment on what a great idea the soylent green base idea is.
That's almost as cool as the helmet! |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
SKIN JOB 66 Community Member
![](http://propsummit.com/upload/351/polnarefff.jpg)
Joined: 16 Jan 2008 Posts: 2724 Location: FRANCE
|
Posted: Mon Jun 28, 2010 2:23 am Post subject: |
|
|
Another great project completed ?
Tim, you're just killing me !!! YOU NEVER STOP, YOU OLD DEVIL !!!
You'll have to open a SciFi Museum one of these days if you want to keep space in your house...
Well done once again, mate !
Fred _________________ THE FUTURE IS A THING OF THE PAST |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Mon Jun 28, 2010 5:43 am Post subject: |
|
|
Haha....A museum would be great Tim!
Love the helmet stand base. Great idea.
Helmet and badge turned out great as well.
What's the Soylent Green made of Tim? (If you don't mind me asking)
I'm always on the lookout for a prop I can make and would love to try it.
Neil
Quote: | Neil, joberg, steevy, Andy and Fred, I will have something special for you soon. Stay tuned. |
Looking forward to this! ![Smile](images/smiles/icon_smile.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Gaff87 Community Member
![](http://img232.imageshack.us/img232/424/bullitt.jpg)
Joined: 05 Oct 2008 Posts: 1727 Location: United Kingdom
|
Posted: Mon Jun 28, 2010 5:56 am Post subject: |
|
|
How about this as well Tim?
(Found on the RPF)
Neil |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
|
![](templates/BBTech/images/spacer.gif) |