| propsjonnyb Community Member
 
 
 Joined: 16 Jul 2009
 Posts: 476
 Location: Helmdon, Northamptonshire  UK
 
 | 
			
				|  Posted: Tue Jan 19, 2010 7:44 am    Post subject: |   |  
				| 
 |  
				| You  can  'blue' a Coyle, but  remember  pewter is a base metal  mix  of appx 85% tin, copper, antimony,bismuth and lead  in that order , so  the  'bluing' chemicals will react mainly to 'oxidise' the  metals which is why they  work best on steel, with  pewter the copper 'oxidises' the fastest,  which is why  your treated piece will go darker shades  of  coppery brown , wearing  protective gloves is recommended and try  not to touch the piece  being  treated during the process  also  use a good de-greasing agent before and after  treatment,   repeat the 'bluing' process  ensuring  you  always wear  protective gloves and copious amount of water washing,  degreasing and drying  , until the  brown is almost black , using a hair dryer to warm up the  metal helps  but  be very careful as  pewter has a very low melting point and you can weaken  and/or  damage you  piece extremely easily. Some specialist  antique shops  sell   specific  'pewter aging'  kits,  which work very well,  as old  pieces of pewter  turn  'black' with  age which is again an 'oxidising'  process , so  you can  use these type of kits to 'acellerate' that  process,   remember  all chemicals used in any  treatment process  are toxic and dangerous, so  use with care  , always wear  protective gloves and use plently of water  to wash the  item clean each time
 I personally  have had  very  good  results with standard  photoetching chemicals again  because the  chemicals 'etch' or  oxidise copper, again using  gloves,  wash and degrease the  item , mount it so you don't have to touch it ( I normally  use  a thick piece of wire or wooden pegs )  and then using  a cotton bud or 'q'tip swab the  item all over  with the  etching  solution, leave for a few moments  for the  chemicals to react and then wash it  off,   dry it ,  degrease and repeat  until you  have the  level of 'blackness'  you  want , please remember  that all the different  pieces will each react according to their 'metal' content   so some may need  more  treatments than others in order to  match.
 |  |