![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
sith_fire30
Joined: 20 Sep 2011 Posts: 6
|
Posted: Wed Oct 16, 2013 7:47 pm Post subject: THE NOSTROMO - 1:18 Scaled Interiors - Prometheus Work 11/12 |
|
|
Hello everyone!! I've been involved with creating a 1:18 scale world of the original "truckers in space" along with interiors of their towing vehicle Nostromo. The figures are hand sculpted pieces, articulated, 1:18 scale - roughly the same size as your retail Star Wars or GI Joe figures. Comes with accessories and such - imagine a modern toy ALIEN line - that's what I'm creating. I never really planned to get into scratch building any of Nostromo's interior rooms, doors or corridors - I began by just simply creating a small dio that my finished figures could eventually be displayed with. I should have known better - I don't "just simply" do anything when it comes to projects like this. Ha! So instead of going over all that has been accomplished the past couple years, I will refer you to my FLICKR Photostream for all the ALIEN goodness to this point....with some ALIENS and ALIEN 3 thrown in
Alien 1979 - a set on Flickr http://www.flickr.com/photos/sith_fire30/sets/72157629799733654/
My latest work is creating the Nostromo's Main Air Lock door as seen in the film. I started with a foam core/matte board model to get the scale right.
Then for the meat of the project, I created the vectors in illustrator and sent them to a friend of mine to have the parts cut out...
Once the pieces were cut and delivered, I added sculptural details using Aves FIXIT epoxy. I added styrene tubes and sculpted details such as the locking mechanisms to the door as well as some sculpt work to the boarder. The deep recess of the door panels were partially filled with super sculpt before molding...
Once the molds were made, I made a casting of the finished piece.
The door contains both sides - interior and exterior. Below is an images of the exterior and the custom frame I am building that will hold the door into place.
I've also began working on the build to the interior compartment of the Main Air Lock. Images of that will be coming soon. I scratch build using sheet styrene, laser cut materials and coming soon - brass etched pieces (my first time). This work is "for the love of the hobby" at the moment but I can see where I may be selling kits sometime in the future so please let me know if you would be interested. Till then, thanks for taking a look! Much more on the way!!!!
![](http://img.photobucket.com/albums/v299/grail30/ALIEN%20-%201979%20Motion%20Picture/ALIEN%20II%201979%20Motion%20Picture/NOSTROMO%20ALIEN%201979/NOSTROMO-CORRIDORS-4_zps9f53b221.jpg)
Last edited by sith_fire30 on Tue Nov 12, 2013 10:17 am; edited 2 times in total |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
SKIN JOB 66 Community Member
![](http://propsummit.com/upload/351/polnarefff.jpg)
Joined: 16 Jan 2008 Posts: 2724 Location: FRANCE
|
Posted: Thu Oct 17, 2013 2:14 am Post subject: |
|
|
WELCOME on the board Dayton !
Your re-creation in 1:18 scale are truly amazing, BRAVO ! Really happy to finally see you here...
Fred
PS : Oh btw, we had already noticed your work, look here :
http://www.propsummit.com/viewtopic.php?t=3589 _________________ THE FUTURE IS A THING OF THE PAST |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Baron Von Blondle Community Member
![](http://img.photobucket.com/albums/v89/preddyboy666/77.jpg)
Joined: 21 Sep 2010 Posts: 101 Location: In Trouble
|
Posted: Thu Oct 17, 2013 6:29 am Post subject: |
|
|
wow this is stunning! really wonderful work. _________________ Illustrator, Propmaker, general fiddler....https://www.facebook.com/Strangelysaucy |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
andy Community Guide
![](http://propsummit.com/upload/127/block2.jpg)
Joined: 01 Nov 2006 Posts: 6237 Location: Rochester, NY
|
Posted: Thu Oct 17, 2013 2:19 pm Post subject: |
|
|
This is very cool!
Andy |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
8th_Passenger Community Member
![](http://propsummit.com/upload/734/8th_passenger_logo72.png)
Joined: 28 Nov 2009 Posts: 443 Location: Hertfordshire, UK
|
Posted: Thu Oct 17, 2013 3:01 pm Post subject: |
|
|
Looks great sith_fire30.
I've seen your stuff before too.
Liking your Air lock door. You cant beat a bit of laser cutting.
Colin |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Thu Oct 17, 2013 4:19 pm Post subject: |
|
|
I gave you two thumbs up on the RPF on that one...I'll say it again: very cool airlock for sure ![Cool](images/smiles/icon_cool.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
sith_fire30
Joined: 20 Sep 2011 Posts: 6
|
Posted: Fri Nov 01, 2013 11:07 am Post subject: |
|
|
Thanks for all the comments guys!!!
Close to completing the first of several 1:18 scaled corridors for the Nostromo spacecraft (ALIEN 1979). These corridors will vary in length, complexity...depends on what section or deck they are located within the ship. So many variants on the ship - I found this awesome video online that features the door and corridors on the ship...it's like the author read my mind.
http://vimeo.com/53743444
Here are a couple images of the first completed corridor - lacking smaller details, the base (being worked on now) paint job and decals....so how about CLOSE to completion LOL!
Started a new section that leads to the Narciccus Shuttle - you can see this section as Ripley is escaping from the Nostromo, approaching the shuttle entrance.
Sculpted and replicated the padded seat railings in the Main Airlock Chamber, also scratch built the dust grate floor from sheet styrene. Additional details are being added over the weekend.
Started a new section this past week - received various laser cut pieces I designed to begin assembling the main entrance way to the Nostromo bridge. The image shows just the laser cut pieces (hastily put together for the photo - nothing glued down). I will add details using sheet styrene, sculptural and greeblie work.
and finally I decided to reboot my Nostromo galley work. The panels I originally hand made looked too irregular. I had a problem with proportion. With these laser cut parts, I have a much better starting point when sculpting the details of each wall panel...that's right, the details for the Egyptian motif (as Ron Bobb called it) will be sculpted. Once these walls are completed, the opposite side and overhead will be created.
Getting back into some more sculpt work for the next several weeks - gearing up to create the H.R. Giger Derelict corridor which will be a total sculpt job. Very excited
![](http://img.photobucket.com/albums/v299/grail30/ALIEN%20-%201979%20Motion%20Picture/Gigers-Alien-344_zpseff57e68.jpg) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
8th_Passenger Community Member
![](http://propsummit.com/upload/734/8th_passenger_logo72.png)
Joined: 28 Nov 2009 Posts: 443 Location: Hertfordshire, UK
|
Posted: Fri Nov 01, 2013 3:17 pm Post subject: |
|
|
Love it.
I've wanted to do this for a very long time. Hence my Mess/Galley plans. But I've never got there.
Keep it coming.
Colin |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Fri Nov 01, 2013 7:25 pm Post subject: |
|
|
Beautiful project; eager to see it all come together: very promising indeed ![Cool](images/smiles/icon_cool.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Isnochys79 Community Member
Joined: 17 Jan 2013 Posts: 121 Location: France
|
Posted: Sun Nov 03, 2013 6:50 pm Post subject: |
|
|
Your work is fantastic and your photos are superb too... |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
sith_fire30
Joined: 20 Sep 2011 Posts: 6
|
Posted: Tue Nov 12, 2013 10:16 am Post subject: Prometheus Work |
|
|
Thanks for all the comment guys!
Say what you want about the movie Prometheus, you MUST agree that the art design for the film was TOP NOTCH! That alone inspired me to work on several Prometheus themed diorama work. The first sculptural piece I am currently working on is a 1:18 scaled Hypersleep Chamber used by the Engineers in the Orrery room. I am using Monster Clay as my sculpting material.
The piece will work hand in hand with the 1:18 scaled Engineers I am currently sculpting as well. My plans for the Hypersleep chamber at this point is to consist of four parts: The Hypersleep Chamber itself, a removable translucent canopy, a portion of the Orrery floor and finally a sculpt of a sleeping Engineer (static pose, non-articulated).
Check out my progress in the images below. The first image was to mainly capture the shape. Moving forward I have been adding detail and making adjustments where needed. Currently working on the rear of the chamber which I feel is the most complex (you'd think). Close to completing one side - working on the opposite side tonight. After that I will move up the sides to the front of the chamber.
Like the Nostromo, I am also working on doors and corridors of the Prometheus ship itself....and similar to the Nostromo, I plan on building a 1:18 scaled diorama of the bridge. Below are some images of what I have already completed - a mix of vector/laser work and scratch building from sheet styrene and sculptural elements.
So as you can see, the art of Prometheus has inspired me greatly (duh!) LOL! I have many more plans on the horizon...including the modern take on a personal favorite
![](http://img.photobucket.com/albums/v299/grail30/Prometheus/SJ-CHAIR1_zps7b463ebc.jpg) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Tue Nov 12, 2013 5:52 pm Post subject: |
|
|
Wow! F.A.B. Love what you're doing with all those set pieces. Eager to see the following installment! |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Ads1066 Community Member
![](http://38.media.tumblr.com/83394cda1fc3cd050c9269cb8509565f/tumblr_ndblqpt9n31tiikwoo8_r1_250.gif)
Joined: 28 Oct 2014 Posts: 62 Location: London. United Kingdom
|
Posted: Thu Oct 30, 2014 9:28 am Post subject: Nostromo Interior Diorama scale models |
|
|
Hi everyone, this is my 1st post here in the Prop Summit Forum, and having seen some magnificent efforts made by folk with their Nostromo Interior Diorama models i thought i would like to share with you my efforts, I first started making Nostromo Interiors way back in 1982 along with some people relying on countless replays of Alien on VHS Tape, The Movie Novel,Scanlons Making Of Alien as well as my own sources ( I was given a set of photographs and schematics from a family friend) and various magazines such as American Cinematographer, Cinefantastique, Cinefex etc. The first model i built was a speculative C' Level Corridor section using Mounting Board Media with added wiggets and a splash of acrylic for weathering, My latest work is on the Nostromo Main Airlock Vestibule : https://www.flickr.com/photos/88809084@N05/sets/72157648595457879/ you are more than welcome to have a look and let me know what you think! Its been fun and inspiration to see other folks real excellent input and exchanges of ideas and information concerning Alien and i hope i can be involved too! ![](images/smiles/003.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
joberg Community Member
![](http://propsummit.com/upload/502/255_(110x83).jpg)
Joined: 06 Oct 2008 Posts: 9447
|
Posted: Thu Oct 30, 2014 6:27 pm Post subject: |
|
|
Welcome to Propsummit Ads1066. Good efforts in re-creating the set of the Nostromo (never easy) and glad you're tackling the landing gear as well ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Ads1066 Community Member
![](http://38.media.tumblr.com/83394cda1fc3cd050c9269cb8509565f/tumblr_ndblqpt9n31tiikwoo8_r1_250.gif)
Joined: 28 Oct 2014 Posts: 62 Location: London. United Kingdom
|
Posted: Fri Oct 31, 2014 3:12 am Post subject: |
|
|
Many thanks Joberg, I would have posted some of the photos of my Nostromo Interiors but it seems the file size of the photos are too big for the "Upload Tool V.3" so hence the link i posted The Nostromo landing leg was a one-off curiosity event i was to build Ash's Blister room with the landing leg in the background for optical scale, but the Main Airlock lured me elsewhere and so focusing on that at the moment. any suggestions on how to post up photos would be most appreciated as i am still in the Stone age (1970's!!) and only just mastered the use of a hammer!! The media i use for my models is basically Mounting Board, a stiff cardboard which in some circumstances can be easily sculpted and perfect for maquette construction, with additional detailing sometimes a trip to the Greeblie Box (wiggets) is in order, the hard work is to keep to the original appearance as much as possible--though with Blue Prints i would not rely on them too much as they would have been printed Pre-Production, and as you are aware reality and costs often creep in in a production!--and the temptation to improvise is very strong but i feel thats's not the heart and soul of the movie and i want to give a form of "Tribute" to the set designers and constructors ( Ron Cobb, Roger Christian, Micheal Seymour, etc..) as i go along small things creep up and changes to the models are often done--the Mess Room for example i recently discovered where the "Blank Doorway" is located a bench seating which i have never clocked before and it isn't certainly on the Blue Prints--along with the seating around the table gets moved about quite a lot in various scenes in Alien! ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Space Jockey Community Member
![](http://propsummit.com/upload/585/230.jpg)
Joined: 13 Apr 2009 Posts: 559 Location: East Tennessee
|
Posted: Fri Oct 31, 2014 11:28 am Post subject: |
|
|
Are these the models you've been posting over on the RPF and Aliens Legacy?
Very nice work, and if you are the same person good luck at the Leicester National Space Center show! |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Ads1066 Community Member
![](http://38.media.tumblr.com/83394cda1fc3cd050c9269cb8509565f/tumblr_ndblqpt9n31tiikwoo8_r1_250.gif)
Joined: 28 Oct 2014 Posts: 62 Location: London. United Kingdom
|
Posted: Sat Nov 01, 2014 5:54 am Post subject: |
|
|
Many thanks Space Jockey, no i haven't posted anything on other forums--Alien Legacy Etc. though i have shared my photos of my Dioramas with Sith_fire 30 ( a fellow forum member here) as well as ideas and input. I know quite a few people have taken their creations to various exhibitions which sounds fun, but i barely have the time to be honest! ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Space Jockey Community Member
![](http://propsummit.com/upload/585/230.jpg)
Joined: 13 Apr 2009 Posts: 559 Location: East Tennessee
|
Posted: Sat Nov 01, 2014 6:43 am Post subject: |
|
|
Yeah, I look at Sith-fire's facebook page quite a lot, amazing stuff. Seems like there are a few people now making interior set models of Nostromo. Again, nice job and keep up the great work! |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Isnochys79 Community Member
Joined: 17 Jan 2013 Posts: 121 Location: France
|
Posted: Tue Nov 11, 2014 10:07 am Post subject: |
|
|
Ads 1066 your work is fantastic.I can imagine the amount of time spend of these models from concept to completion...but what a great time too ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
Author |
Message |
Ads1066 Community Member
![](http://38.media.tumblr.com/83394cda1fc3cd050c9269cb8509565f/tumblr_ndblqpt9n31tiikwoo8_r1_250.gif)
Joined: 28 Oct 2014 Posts: 62 Location: London. United Kingdom
|
Posted: Wed Nov 12, 2014 4:12 am Post subject: |
|
|
Many thanks Isnochys79, much appreciated, most of the joy of building dioramas and models is the pleasure it gives people, i know when i see other folks creations i just love staring at the tiny detailing and massive effort put into it as well as gleaming inspiration too! I am constructing different rooms and sections of The Nostromo in a random manner each "unit" is portable and can be Mixed and Matched, i don't want to construct a "Fixed" deck level of the Nostromo as the layout in reality bears absolutely no relation to the exterior and its pointless really trying to "Hammer a square peg into a round hole" a large standard dose of fantasy and artistic license coupled with budget restraints. I am currently working on the section of corridor outside the Autodoc, after that i will start on Ash's Blister room--Have a look at my link for photos of my Nostromo creations : https://www.flickr.com/photos/88809084@N05/sets/72157648595457879/ ![](images/smiles/001.gif) |
|
Back to top |
|
![](templates/BBTech/images/spacer.gif) |
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
![](templates/BBTech/images/tlc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/trc.gif) |
![](templates/BBTech/images/spacer.gif) |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/blc.gif) |
![](templates/BBTech/images/spacer.gif) |
![](templates/BBTech/images/brc.gif) |
|
![](templates/BBTech/images/spacer.gif) |